RIFF JTAG – Samsung SHW-M200K NEXUS S Unbrick – Dead boot repair supported

RIFF JTAG – Samsung SHW-M200K NEXUS S Unbrick – Dead boot repair supported

29.03.2013  RIFF JTAG – Samsung SHW-M200K NEXUS S Unbrick – Dead boot repair supported
Repairing bricked Samsung M200K is easy with the RIFF Box. The phone is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.
To resurrect Samsung M200K:

•  Solder JTAG cable to Samsung M200K JTAG pads;
•  Connect microUSB cable to phone and PC;
•  Insert battery;
•  Make sure Samsung M200K is selected in the list of models;
•  Make sure a fixed TCK frequency is selected;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

 

 Vortune Partshop
Perum Griya Satria Indah ,Jl.Safir Blok P-21 Sumampir Purwokerto
Whats App :085647913888
Biaya Call/sms ke 085647913888
Pin BB: 22D36FEC